item: OS Giken R3C Triple Plate Clutch Kit For Nissan R32/R33 Skyline Push Type (GM SPLINE)

Description

OS Giken R3C Triple Plate Clutch Kit For Nissan R32/R33 Skyline Push Type (GM SPLINE)

The R3C triple plate clutch is a dedicated racing clutch capable of handling up to 1200hp at the engine. The use of a shared hub allows the clutch to be much slimmer and lighter than comparable clutches. It also reduces damage to the gearbox input shaft that can be caused by multiple hubs.

Note that aggressive use with a standard gearbox may cause gearbox damage – best suited to gearboxes with upgraded internals.

If you have converted your Skyline gearbox to push-type this clutch kit will also suit late BNR32, BCNR33, ER34 (RB25DET and RB26DETT excluding BNR34 with the 6spd). Pull-type Skylines WILL require an OS Giken movement kit to convert to push-type, this clutch kit can be found here.

Includes:

Required bearing/carrier set

Flywheel

Aluminium Cover

3 x 215mm Plates

1 x Centre Hub (GM/Holinger 26 Spline)

Vehicle Compatability:

BNR32 GTR RB26DETT (Early Push Type till Jan.93)

ECR33 GTST RB25DET